Forwarding Scanned Data to Computer Using Operation Panel

Before forwarding scanned data to the computer, check the following:

• MP Drivers are installed. (Windows)

  If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the Canon website.

• When scanning via a network connection

  Make sure the printer is connected to the computer correctly.

  • For Windows:

    • Network Scan Settings

  • For macOS:

    • Scan-from-Operation-Panel Settings Screen

• The destination and the file name are specified in Canon IJ Scan Utility (Windows)/Canon IJ Scan Utility Lite (macOS).

  You can specify the destination and the file name in Canon IJ Scan Utility/Canon IJ Scan Utility Lite. For more on settings of Canon IJ Scan Utility/Canon IJ Scan Utility Lite:

  • For Windows:

    • Settings Dialog Box

  • For macOS:

    • Settings Dialog

Follow the procedure below to forward scanned data to the computer.

1. Check that printer is turned on.

2. Load original on platen.

3. Press the SCAN button.

   If you forward the scanned data to a computer for the first time, the Scan menu screen is displayed. Go to step 4.

   

   If you have forwarded the scanned data to a computer, the Scan standby screen like shown below is displayed.

   

   If you change the destination, original type or scan settings, press the MENU button, then go to step 4.

   Go to step 9 if you do not change the destination or scan settings.

4. Select Save to and then press the OK button.

5. Select a computer to forward scanned data and then press the OK button.

   If you forward the data to the USB-connected computer, select Local (USB).

   If you forward the data to the LAN-connected computer, select a name of the computer to forward the scanned data.

   Note

   • If you select Search again and press the OK button, the printer starts searching for the connected computers again.

6. Select Original type and then press the OK button.

7. Select type of originals and then press OK button.

   Note

   • The (asterisk) on the LCD indicates the current setting.

   Auto scan

   The printer detects the type of the originals automatically and the image is forwarded in the optimized size, resolution and data format.

   Important

   • Load originals properly according to their type; otherwise, some originals may not be scanned properly.

     For details on how to load the original:

     • Loading Originals

   • The following items cannot be scanned properly.

     • A4 sized photos

     • Documents smaller than 5 x 7 in. (127 x 178 mm) such as a paperback with its backbone cut off

     • Originals on thin white paper

     • Long and narrow originals such as panoramic photographs

   Document

   Select to scan the document.

   Photo

   Select to scan the photo.

8. Specify the scan settings.

   Specify each scan setting in order.

   Use the button to select a setting item, then press the OK button.

   Use the button to adjust each setting item, then press the OK button. The next setting item is displayed.

   For details on each setting item:

   • Setting Items for Scanning Using Operation Panel

   The Scan standby screen is displayed after all the settings have been specified.

   Note

   • When Auto scan is selected for Original type, the Scan standby screen is displayed without setting items being displayed.

9. Press the Black button or the Color button.

   • When you select JPEG or TIFF for Data format:

     The printer starts scanning and scanned data is forwarded to the computer.

   • When you select PDF or Compact PDF for Data format:

     The confirmation screen asking you if you continue scanning is displayed after scanning is complete.

     • Selecting Yes and pressing the OK button allow you to scan the originals continuously. Load the next document on the platen and start scanning.

     • By selecting No and pressing the OK button, scanning is complete and the data is forwarded to the computer in one PDF file.

   Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility/Canon IJ Scan Utility Lite.

   Remove the original on the platen after scanning is complete.

   Important

   • If the scanning result with Auto scan is not satisfactory, select Document or Photo according to the original in step 7, then specify the scan size or other setting items in step 8.

Note

• You can use the following scanning method.

  • Scanning with a WIA-compliant application software (Windows)

    For details:

    • Scanning with WIA Driver

  • Converting a scanned document to text (OCR)

    For details:

    • For Windows:

      • Extracting Text from Scanned Images (OCR)

    • For macOS:

      • Extracting Text from Scanned Images (OCR)

  • Forwarding the scanned data to the computer using WSD (one of the network protocols supported in Windows)

    • WSD scan from dev.

    When selecting a computer searched using WSD as the transfer destination, Original type and the scan setting items are not displayed.

    Also in step 9, press Color button even for monochrome originals.

• When using Windows, the program selection screen may be displayed after pressing the Color or Black button.

  In this case, select Canon IJ Scan Utility and click OK.